All articlesPool care · October 28, 2026

Opening your pool without the guesswork

Aqua Escapes4 min read

Start with the cover, not the chemicals

Pump the standing water off the cover before you pull it. If you drag a cover full of leaf tea into the pool, you have made a two-hour job into a two-week one.

Clean, then balance, then shock

Skim and vacuum first. Brush the walls while the water is still cold. Only then test and adjust.

  • Alkalinity first. Get it to 80–120 ppm before you touch pH.
  • Then pH. 7.4–7.6 is the range you want.
  • Then chlorine. Shock at dusk so sunlight does not burn it off.

Give the filter a full day

Run the pump continuously for 24 hours after opening. Most cloudy water on opening day is a filter that has not had time to work, not a chemistry problem.

When to call us

If the water has been green for more than a few days, or the pump is noisy, stop adding chemicals and call the shop. We would rather diagnose it once than sell you three buckets of shock.

Need a hand with your pool?

We open, close, service and install pools across the South Coast.

Get in touch